This web page is a description of how I replaced torsion springs on a garage door. Because the outdoors of the door carries the 3/4-inch plywood paneling to match the home, and that plywood weighs about two lbs/sq-ft, I estimate the door weight to be about 7 x 10 x two = 140 lbs of paneling with the rest 238 – 140 = 98 lbs the interior panels, hardware, and cobwebs.
It would expense less to install a steel door with no opener then it would to set up a wood door with an opener etc… High tech doors come with enery-effecient glaze and thick insualation as effectively as finshed interiors and other upgrades.
I carried an additional wrench in my pocket whilst winding, since I didn’t want to be holding a wound spring that I could not set because I had dropped the wrench (although one particular could rest the winding rod against the door in this case whilst selecting up a dropped tool).
We also have step by step guidelines for EZ-Set Torsion Spring Replacement In addition, one particular of our clients has provided excellent EZ-Set Torsion System guidelines for removing the spring without having wrecking the winding unit that secures the stationary cone.
For home owners who lack the expertise or education to work with mechanisms or springs that must be installed under high tension, there can be major implications/consequences with respect to their personal safety and with the suitable operation of that spring.